The hydraulic-driven cutter is a robust and programmable machine with a 5.5-inch monochrome display, designed for precise and gentle swing cutting. The machine allows for adapting the knife's time spent in the lower dead end to suit different materials, ensuring the optimal cutting quality. The cutter's ultra-smooth stainless-steel table surface is equipped with air jets, which makes material handling easy. The clamping pressure can be infinitely adjusted to suit any cutting material within a wide setting range using a turning knob with a scale. The cutting line is marked clearly and brightly by LEDs for the operator's convenience. The machine's operation is facilitated by an ergonomically positioned control panel with a 5.5-inch monochrome display and an additional membrane keypad. It has a memory capacity of up to 198 programs, allowing for storing and adapting recurring cutting sequences at any time. The creation of cutting programs can be done manually or through block programming, which is intuitive and menu-driven. The pre-clamping time can be adjusted to optimize the cutting quality according to the material. The cutter's features include a compact and sturdy iron frame based on computer-aided design, two-channel safety hydraulics, a false plate for the pressure clamp, and a modern frame construction from specially designed precision profiles. The machine's cutting quality is further enhanced by the direct and precise measuring system. The table blower with a separate outlet provides permanent air, ensuring the efficient operation of the cutter. The machine's operator guidance for knife change is integrated, and the knife change process is automatic, with fine adjustment from the front side of the machine.

The hydraulic-driven cutter is a robust and programmable machine with a 5.5-inch monochrome display, designed for precise swing cutting. It adapts the knife's time in the lower dead end for different materials, ensuring optimal cutting quality. The stainless-steel table has air jets for easy material handling, and clamping pressure is adjustable. Bright LEDs mark the cutting line.

The control panel with a 5.5-inch display and membrane keypad is ergonomically positioned. It stores up to 198 programs for recurring cutting sequences, manually or through intuitive block programming. Pre-clamping time can be adjusted for material optimization.

The cutter features a compact iron frame, two-channel safety hydraulics, a pressure clamp false plate, and precision profiles. It has a precise measuring system and a table blower for efficient operation. Knife change guidance is integrated and automatic, with fine adjustment at the front.

Play Video

Discover more about this product

Request for Consultation
Download Brochure
Parameters Mohr D56 Mohr D80
Cutting width560 mm | 22.05 in800 mm
Feeding depth560 mm | 22.05 in800mm
Feeding height max.80 mm| 3.15 in100 mm
Clamp pressure min.180 daN | 397 lbs180 daN
Clamp pressure max.1,200 daN | 2,646 lbs2,700 daN
Backgauge speed on return way (0 - ...)70 mm/sec | 2.76 in/sec130 mm/ sec
Smallest cut, automatically w/o false plate15 mm | 0.59 in15 mm
Dimensions (w × d × h)1,150 × 1,670 × 1,500 mm1,430 x 1,970 x 1,500 mm
Weight575 kg | 1,268 lbs900 Kg
Electrical power input (apparent power)2.2 kVA 1P AC 180-240,50/60 Hz)1x32A3 phase, 380 V – 50 /60 Hz
Country of OriginGermanyGermany